BY ERIKA HUDDLESTON
This Dilbeck house in the Cochran Heights neighborhood was built in 1936. The original brick chimney appeared intact until the decrepit metal chimney cap was removed and suddenly the top line bricks were seen to be loose and were easily knocked off. The Portland Cement mortar had somehow detached from the brick due to moisture over time. To repair the chimney, the mason mixed a wheelbarrow of lime and cement mortar on-site and added shovels full of sand little by little until the mix color-matched the original. Historic bricks were found in the backyard from an old patio and they matched the “Crown” and “Ferris” stamps which were found on the loose chimney bricks. These extra bricks were unneeded because the loose bricks were just relaid on the chimney yet it was nice to know that the chimney could have been repaired with extra historic bricks! Extra old bricks with specific stamp markings can often be located on eBay, Craig’s List, and at Orr-Reed (in Dallas), for example. Charles Dilbeck used “Crown” and “Ferris” bricks to build this house and chimney— and they were dry pressed very close to Dallas in Ferris, Texas! Today, the little town of Ferris still has a small but charming Main Street and is famous for its bluebonnet trail in the spring. In and around the 1930’s, the Ferris Brick Company in Ferris supplied many of Dallas’ new buildings. In 1904, the Dallas Pressed Brick Company was founded in Mesquite… those bricks are found here and there, stamped with “DALLAS”. After a few hours of work, this 87 year old Dilbeck chimney was good as new for another 87 years!”